How to Replace Shocks and Struts Replacing Shock absorber strut mountcan be dangerous if you don't know what you're doing.Read through these instructions carefully before attempting to dismantle your vehicle to ensure safety and efficiency throughout the project. Spring Compressor The shocks and struts on many vehicles are integrated with springs that can pop off and injure you or damage your vehicle if not removed properly.In such cases, you'll need a spring compressor in order to take everything apart safely.
You can rent a spring compressor from your local auto parts store but it's important to understand how to use it.This is the most integral function for replacing shocks and struts and you need to be careful.If you have any doubts about removing the springs, you should consider taking your vehicle to a mechanic instead.
Raise the Vehicle Once you have all of your parts and tools ready, you should raise your vehicle one side at a time using a car jack.After it's up, place a jackstand behind the front wheel to ensure stability.Otherwise, you can use a lift.
Just make sure the vehicle is secure before attempting to loosen anything or getting under the vehicle.
Remove Old Shocks and Struts First, you'll need to remove the wheels.Next, using your spring compressor, you'll look for three bolts at the bottom of the shock or strut that holds it in place.Loosen these bolts but don't remove them completely just yet.
On the top of shock or strut is another bolt inside the engine compartment.You can use an impact wrench with a socket extension to loosen it.Get this loose and finish removing the other bolts and your shock or strut should come free.
Installing New Shocks and Struts Once the old shocks and struts have been removed, you can simply replace the new ones.Make sure that you tighten all of the bolts securely.You will probably need a torque wrench to do this.
Put the wheels back on the vehicle and you're ready to test it out.
Whatsapp : 
Tel : 
Email : 