• Facebook
  • Linkedin
  • Twitter
  • YouTube
4 results found for "chevrolet daewoo link"
  • CHEVROLET /DAEWOO link K80631
    CHEVROLET /DAEWOO link K80631
    CHEVROLET /DAEWOO link K80631
    Nafurancar tie rod ends are manufactured using the most advanced one-piece technology. The ball end piece is made of Cr40 alloy steel and has been hardened. The mirror finish technology provides the surface roughness of the ball pin no more than 0.4 microns, which significantly increases the life of the hinge. The design and processing technology of the ball and socket joint ensure that the ball and socket joint will not jump out of the original seat even under high-angle loads.
  • CHEVROLET /DAEWOO link 15024511
    CHEVROLET /DAEWOO link 15024511
    CHEVROLET /DAEWOO link 15024511
    Nafurancar tie rod ends are manufactured using the most advanced one-piece technology. The ball end piece is made of Cr40 alloy steel and has been hardened. The mirror finish technology provides the surface roughness of the ball pin no more than 0.4 microns, which significantly increases the life of the hinge. The design and processing technology of the ball and socket joint ensure that the ball and socket joint will not jump out of the original seat even under high-angle loads.
  • CHEVROLET /DAEWOO link 1603148
    CHEVROLET /DAEWOO link 1603148
    CHEVROLET /DAEWOO link 1603148
    Nafurancar tie rod ends are manufactured using the most advanced one-piece technology. The ball end piece is made of Cr40 alloy steel and has been hardened. The mirror finish technology provides the surface roughness of the ball pin no more than 0.4 microns, which significantly increases the life of the hinge. The design and processing technology of the ball and socket joint ensure that the ball and socket joint will not jump out of the original seat even under high-angle loads.
  • CHEVROLET /DAEWOO link 1603148
    CHEVROLET /DAEWOO link 1603148
    CHEVROLET /DAEWOO link 1603148
    Nafurancar tie rod ends are manufactured using the most advanced one-piece technology. The ball end piece is made of Cr40 alloy steel and has been hardened. The mirror finish technology provides the surface roughness of the ball pin no more than 0.4 microns, which significantly increases the life of the hinge. The design and processing technology of the ball and socket joint ensure that the ball and socket joint will not jump out of the original seat even under high-angle loads.

A total of 1 pages

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp